What equipment comes with the Parking EPS01 car parking sensor?



Parking Sensor Unit



The parking sensor processor is the brains behind the Parking EPS01car parking sensor system. It mounts with the included adhesive pad out of sight either inside the boot of the car or behind the rear bumper.

The parking sensor unit simply wires into the reverse light for power so that the unit switches on when you place your vehicle into reverse gear. The sensor unit is supplied as a self fitting unit, which is easily achieved by easily loosening or removing the rear bumper of your car or by accessing it from underneath. However any qualified auto electrician, mechanic or bodyshop technician will be able to fit the PD1 car parking sensor in less than than an hour.





Parking Sensor Antenna



The sensor antenna is a thin flexible adhesive strip that mounts behind the bumper. It's 2.7metre length ensures the car parking sensor and range covers even the largest vehicles, offering a full, all round detection zone. It can be cut to the right length with scissors to suit individual cars, caravans and motor homes. Simple yet very effective.





Parking Sensor Speaker



The Speaker is discreet - just 20mm in diameter and mounts inside the vehicle at the rear of the car using the included adhesive pad. The volume is loud enough for people of all hearing levels when mounted at the rear.



Product Name: Electro-Magnetic Parking Sensor

Mode Number: EPS 01



Simple installation and universally compatible...



As the Parking EPS01 car parking sensor is universally compatible with any car, small van, motor home and caravan, its easy installation which requires NO DRILLING to the vehicle, offers a huge advantage over its competitors as UltraSonic type of sensors require drilling of the bumper, running wires behind your bumper and mounting and painting the sensors once installed.





Parking EPS01 advantages are clear:



Using Electro-Magnetic Technology, the EPS01 will scan the full length of your bumper, from end to end.



When reverse gear is engaged the system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different audible tones Zones) alerting you of your proximity in relation to surrounding objects!





As you reverse Zone 1 (furthest away from the object) picks up the object first.



Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beee" sound





The Parking EPS01 will fit any (12V) vehicles including cars, vans & motor homes that have plastic bumpers. (97% of vehicles have plastic bumpers)