Oreins stamping workshop supplies the automotive, door lock hardware, plumbing, communications, and fire protection industries from our new 200,0-sq. M. With a complete in-house tool design, engineering staff, and tool-room, Oriens is capable of building over 90% of all necessary production tooling.



Production capabilities include ICOP, Die-set Transfer and Progressive Die presses with a range from 10 to 500 ton. These presses can form material from 0.010" (0.254mm) up to 0.150" (3.81mm) thick. Extensive experience exists in 300/400 Series Stainless Steel, 1008/1010 Cold Rolled Steel, Aluminum, Copper, Brass, as well as specialty materials such as HSLA (high strength low alloy) and Galfan. The parts supplied range in depth from ?" (12.7mm) to 10" (254mm).



All presses are computer controlled to insure exact customer specifications and quality requirements, thus producing parts with maximum accuracy. Our sophisticated, well designed in-house systems of production allow us to expertly maintain and protect the high cost of tooling, which is critical in today's marketplace.





Materials: Sheets made of aluminium, steel and stainless steel.

Dimensions: approx. 2.450 x 2.000 x 1.450 mm.

Piece numbers: Medium series: 10.000 - 100.000 pieces (Minimum 5.000 pieces / lot)

Process setting up: Milling, drilling, thread cutting, welding.

Surface treatment: Hot galvanising, Plating, Coating, Polishing, Bronzing, Passivating, Grinding,etc.

Inspection possibilities: Analysis wet chemically or by x-ray spectrometer, pressure inspection up to 200 bars, 3-coordinate computerised numerical control measuring machine. Mechanical values for tenacity, yield stress, notched bar impact tenacity, x-rays, metallography, magnaflux test.

Quality Control: According to ISO 9001:2000.