LCD wireless and wired GSM alarm system (China)

1. Blue backup LCD display everything you want to konw about the panel.if you connect the phone line, the panel would send SMS by gsm sim card first (if the sms is set in the alarming zone) then dial from the telephone line. If there is no telephone line, the the panel would send sms by gsm sim card first ( if the sms is set in this alarming zone) then dial from the gsm sim card also.

2. Full compliance with ADEMCO Contact ID

a. when alarming, you can hear which sensor in which zone is alarming b. voice prompt you how to operate for every step

3 . 8 5 event logo about arming \ disarming \ alarming (with data stamp), viewable directly on the panel LCD.

4. 12 seconds voice message, in case of alarming,automatically playing after you pick up your phone.

5. Any of the detector can be door bell when disarmed ; any detector can be local siren when disarmed.

6. Monitor the old,the sick and the important place:when the old or the sick doesn't move, or the important warehouse hasn't human presence for a period of time, the panel will alarm.

7. Any zone type programmable (including:watchdog zone,exit/ entry delay,24 hours zone,sounder/ silent when alarming, armed /part armed zone,sensor/no sensor in the zone)

8. Panel can receive the detector low voltage signal and display zone number and detector number on the LCD and sound a beep

9. 7 wired terminals,1 2 v alarm output, 12v power output(continous), wired siren terminal

10. 6 time points of timed Auto- Arming/ disarming (24 hour mode)

11. Wireless detector installing test

12. Listen in and speak function

13. Away arming with siren sounder ON

14. any zone can be seperately armed disarmed

15. Built-in high capacity rechargeable battery, auto charge/discharge