Kingsley Engineering Services (India)

Kingsley Engineering Services was founded in the year 1996 with the objective to provide total safety and environment solutions for various applications in all kinds of industries. The company is professionely managed by its founder S.S Tiwari who is a technocraft and a veteran of the safety industry with a work qualified and well trained work force of over 35 members.

We are pleased to introduce ourselves as leading manufacturer of flame arresters, breather valves and Emergency Vents Under our own technical proven skilled manpower. We have full fledge facility for desigining manufacturing and testing of the above equipments.

Our manufacturing set up is approved by

MS CENTRAL MINING RESEARCH INSTITUTE DHANBAD.

These products are used for safety and environment.

Refineries and chemicals plants whith storage tank.

Distillery and solvent recovery plants.

Process Technical chemicals industry.

Pharmaceuticals industries.

Transportation of flammable liquids.

Waste disposal and Biogas technique.

Gas analyzing equipments.

Waste gas combustion plants.

Flame arresters for use in open vent pipes, vent valves, delivery pipe lines, Acetylene generators, petroleum, oil and gasoline or liquefied petroleum. Storage or processing for piping system.

FLAME ARRESTER are safety devices mounted on the chemical storage line and ducts carrying flammable liquids, vapours and gases.

These are designed to prevent fire penetration explosions and detonations in tank installation of any kind. The Flame Arrester could IN LINE or END OF LINE and classified as Explosion proof or detonation proof. The internal element is made of metal sheet, the gas in allowed to pass along with the element which prevent fire entering in process on the event of external fire Flame BANK is so designed that pressure drop is negligible with reference to API 2000.

Temperature sensor may be install in order to detect flames and to initiate counter measures to extinguish to fire. To Assist your requirement the details such as fluid and gas vapours contains Tank size and capacity in litre pumping rate in and out from the storage tank to be specified.

BREATHER VALVE:

Breather Valve helps in breathing of the storage, In and Out. These are mainly designed to prevent Vapour losses, Evaporation, Over Pressure, Storage buckling, negative pressure Vacuum

We manufacture Breather Valves to suit chemical conditions, Temperature and Blanketing systems. In case of over pressure, due to high IN flow to the storage, pressure inside is balanced to normal. While withdrawing the liquid, from the storage creates vacuum inside the storage. As we know that vacuum is such a negative pressure, which can hold the liquid from drawing Out or buckle the vessel. In both the cases Breather Valve play very important role in the total system.

Breather Valve are designed in reference to API 2000. Spring loaded pallets can also be furnished. In case the vapour of the stored fluid could be cause of pollution, flanged unit can convoy through inlet and outlet tubes, these vapour in a safety zone.

EMERGENCY VENT

Mainly these vents are mounted as secondary devices, if the breather valve installed on the storage is not capable to relive the sudden rised pressure. Normally the EMERGENCY VENTS are designed from 10 to 30 in size. EMERGENCY VENTS above above 18 are also used as MAN HOLE to the storage at shut downs.

MOC of the vents are DESIGNED in SS304 and SS316. MOC can be changed in special material as per the customer requirement. The venting DEAD WEIGHT plate is assembled with non contact sealing material, PTFE backed with soft cushion Neoprene rubber sheet.