The motor stirrer having maximum speed upto 4000 r.p.m. unit is clamped to a C.P. rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed Motor with speed regulator is fitted w... [india]

INDIAN CLASSICAL INSTRUMENT CALLED TANPURA... [india]

Cat. No. : AM 006 MAIZE SHELLER Working: The dried corn cobs are put into the feeding hopper. The machine separates grains from the cobs and passes the grains through a sieve. The grains falling on a spout are cleaned by air pressure and clean grains co... [india]

Tillage may be defined as the mechanical manipulation of soil for any purpose and rotary tiller achieves this objective with reduced draft requirement. Features Wear Resistant Blades P.T.O. Shaft with shear bolt for overload protection Option of side chai... [india]

Cat. No. : AM 005 PADDY THRASHER Suitable for the threshing of Wheat, Sorghum, Barley, Grams (Chick-Peas), Soybean, Millets, Oats, all type of Peas and Pulses etc. Output : 300-1000 Kgs of Grain Per Hour Power: Coupled with 10 HP diesel engine. This is... [india]

Cat. No. : CM-002 PAVING BLOCKS MAKING MACHINES PRODUCTION DETAILS :- MAXIMUM PRODUCTION IN 8 HOURS ----- 1000 TO 1200 CYCLES / PALLETS 6000 TO 8000 BLOCKS NO. OF INTERLOCK PAVING BLOCKS PER PALLET -- 6 NO. (AVERAGE) OPERATOR REQUIRED ON MACHINE ---- 2 ... [india]

Tablets Making Machines are manufactured to make small Tablets like as Round, Square, Rectangular, Oval, Hexagonal, Capsule shape or any other shapes. The Machine produces maximum Dia of Tab up to 150 MM. Asian Tablets Making Machines warrent : Best Outpu... [india]

Features: Production Capacity: 70 nails per minute 50 nails per minute Size of Nail Manufactured (Length) No. 2 (1.5"), No. 3 (1.75"), No. 4 (2") & No. 5 (2.15") No. 2 (1.5"), No. 3 (1.75"), No. 4 (2"), No. 5 (2.15"), No. 6 (2.35") & No. 7 (2.5")... [india]

SPECIFICATIONS Size No. LENGTH OF BLANK WIRE SIZE S.W.G PRODUCTION P.M MOTOR H.P &R.P.M APC-TM1. 1/4"-1" &1.1/2" 9-14 15-26 1X1440 APC-TM2. 1/2"-2" 5-12 5-16 1X1440 APC-TM3. 3/4"-3" 0-8 4-10 2X1440 APC-TM4. 1"-4" 3/0-5 3-7 2X1440... [india]

Features: Length of stroke (mm): 457 610 762 Length of ram without tool slide (mm): 1016 1270 1524 Ram bearing in column (mm): 686 826 902 Ram bearing in width (mm): 241 298 305 Tool slide traverse (mm): 102 152 152 Length of cro... [india]